Home » Archive

Articles tagged with: how to

Featured, Headline, How to's, Metal Roof Deck, Structural Products, Technical guidance, Uncategorized »

[27 Apr 2017 | No Comment | ]

Fasteners are a vital component to ensure the safe installation of decks. The correct fixing as specified by the fastener manufacturer, to suit the application of fixing to cold rolled thin gauge purlins, hot rolled steel sections or timber supports. Self drilling/self tapping screws (commonly known as drill screws), must be a minimum 5.5mm diameter, […]

Featured, How to's, Metal Roof Deck, Technical guidance »

[26 Apr 2017 | No Comment | ]

Fasteners are fixed from above the deck into a suitable support structure. It is not possible to install fasteners from below the deck. This unfortunately does leave the drill point and end of the fastener visible from below. Any attempt to remove the protruding end could result in damage to the deck coating but more […]

Acoustics, Featured, Headline, How to's, Metal Roof Deck, Technical guidance »

[26 Apr 2017 | No Comment | ]

ABSORPTION – The loss or dissipation of sound energy in passing through a material or on striking a surface. The term may also refer to the property of a material to damp sound energy. ABSORPTION COEFFICIENT – The fraction of energy absorbed on striking any surface, stated as values between 0 and 1.0. If a […]